When the audio movie is over you have two choices:
Click on the small triangle at the lower left to replay the audio movie or scroll down to read the features and specifications of the machine.

Click for Next Video

Return to the index of machines at the "Home Page" to select and view a different machine.



FEATURES


  • The SPIN WINDER is the production equivalent of up to four single spindle machines, and all in a convenient package just 22 inches wide.
  • Conventional coil winding machines rotate the bobbin or coil form, pulling the wire onto the bobbin. The SPIN WINDER holds the form stationary, and spins the wire onto the bobbin with a winding flyer.
  • There are several advantages to this method. Taps of any length can be pulled out where required without the need for taping the tap down carefully before proceeding with the winding operation. Each coil is self leading from one to the other which eliminates the "seek, grasp and anchor down" operation on the start lead for each bobbin if wound by conventional means.
  • Another advantage of the SPIN WINDER is that it lends itself readily to winding difficult bobbins such as greatly unbalanced forms or unusual shapes which are difficult to hold safely for high speed rotation. As the tooling in the SPIN WINDER is stationary, quick insertion and removal production aids such as bulky toggle clamps can be easily incorporated in the tooling. These production aids would be virtually impossible to mount on a rotating spindle.
  • The SPIN WINDER is equipped with an infinitely variable transmission which eliminates the need for changing gears or cams to vary the traverse speed.
  • The pitch may be changed from one job to another by resetting a single dial. Bobbins from 1/8" to 2 1/2" diameter and from 1/8" to 3 1/2" long may be wound on the SPIN WINDER.

SPECIFICATIONS


  • Two models available with different speed motors. Wire sizes: From #21 AWG to #46 AWG with heavy duty 3550 RPM motors. From #24 AWG to #46 AWG with 7700 RPM motors.
  • Motors: Perm-Mag with variable SCR speed control for optimum winding speeds.
  • Tool stations: Four, arranged on a rotating turret with safety interlock.
  • Dereelers: Two on top with over-end payoff. Adjustable tension control for wire range of #21 to #46. Optional floor mounted pail pack at rear of machine.
  • Rotation: CW or CCW, switch selectable.
  • Counter: Electronic with vane pick-up. 4 or 5 digit dual presetting counter provides automatic deceleration and 1 count accuracy. Additional presets available.
  • Power: 115 VAC 50/60 HZ
  • Dimensions: 22"W x 37"D x 32"H including Dereelers. 14"H without Dereelers.
  • Weight: 130 lbs. net; 185 lbs. shipping.

           Send for Brochure for further information and prices.