FEATURES
- Four machines in one: The TWO PLUS TWO features two sets of two spindles.
Each pair runs independently of the other but with the same traverse speed and
length. This system allows the operator to work on two sets of dual spindles, while at the
same time, two identical coils are being wound.
- Wide bobbin range: The machine will handle bobbins up to 2 1/2" in
diameter and from .050" to 4" in length.
- Wide wire range: Smooth winding action handles wire in the range from #24
AWG to the finest.
- Electronic counter with automatic deceleration: Required equipment with the
TWO PLUS TWO is an electronic counter with a 1:1 ratio. A slow-down feature
allows automatic deceleration from high speeds, allowing no overrun of turns of
wire. Added presets are available as an option for winding coils with multiple
taps.
- Completely variable speed and pitch control: Accurate dial settings permit
variable pitch of layering and variable speeds up to 9500 turns per minute.
- No gears to change: Efficient design utilizes an infinitely variable speed
transmission which eliminates time consuming gear changes.
- No loss of operation time: While two bobbins are winding at high speed, the
operator may tape, remove and replace the two bobbins that have just been
completed. No waiting time for the operator.
- Tailstocks: Quick acting dual tailstocks for bobbins which need to have
flange support during winding.
SPECIFICATIONS
- Wire sizes: #24 AWG to #50 AWG.
- Coil sizes: Up to 2 1/2" diameter.
- Coil length: Up to 4".
- Speed range: Jog (slow) 200 to 700 rpm. High 2000 to 9500 rpm.
- Speed control: Both jog and high speed are independently variable via SCR
motor drive control.
- Wire layering: Length of traverse is set by two limit switches. Rate of
travel is infinitely variable for wire spacing.
- Spindles: Four, arranged in two pairs.
- Dereelers: Four on top. Over-end payoff. Adjustable tension control from
#24 to #50 AWG.
- Motors: Two DC Perm. Mag. ball bearing with electro-magnetic breaks.
- Rotation: CW or CCW switch-selectable.
- Counter: Electronic; 1 to 1 ratio. 4 or 5 digit preset with automatic
deceleration before shut-off. Additional presets available.
- Power: 115 VAC 50/60 HZ.
- Dimensions: 24"W x 32"D x 35"H with dereelers, 16"H
without.
- Weight: 160 lbs. net; 200 lbs. shipping weight.
Send for Brochure for further information and prices.
|