INTRODUCTION
- The all new Simplex Winder is designed as a basic hand-guided winding
machine, to wind an infinite variety of winding forms and nylon bobbins, with a
minimum of set-up time required.
- Using the Simplex, the operator can usually layer wind a coil by hand,
almost as well as with a traverse equipped machine, and better, when winding the
heavier wires.
FEATURES
- Powerful 3/4 HP permanent magnet DC motor with SCR motor control.
- 13 1/2" between spindle and tailstock with standard 26" long
bars.
- Any length between centers available with longer bars.
- 14" swing diameter around spindle with tailstock bars.
- Easily changed from dual Flat Belt Pulleys to higher torque timing belt
pulley combination.
- Reversible spindle: Choice of 1/2" or 5/8" shaft with flat for
holding set-screw.
- Preset add-subtract Electronic Counter in easily seen position. Other multi
preset counters available.
- Dynamic braking for almost instant stopping.
- Optional Electric Brake for maintaining spindle lock when pedal is
released. Can be switched off when not needed.
- Quickly adjustable Tailstock available with various ball bearing mounted
ends, 2" or 3" retraction.
- Eye shield for operator safety.
- 1/2" Jacobs Chuck fits on 1/2" or 5/8" round spindle with
flat.
- Simple and rugged construction.
- Inexpensive, and U.S. made for easy access to parts, accessories and
service.
Send
for Brochure for further information and prices.
|