FEATURES
- The Productor II Toroid Winder is a recent addition to the Gorman line of
fine Toroid Winding Machines.
- Ten sizes of Wire Slider and Side Slider Shuttles are
available for the 4 Inch Winding head and six Side Slider Shuttles fit the 6
Inch Head.
- The Productor II is available with either a 4 or 6 inch Winding
Head and
interchangeable Light or Medium Duty 360 degree Core Rotators. The Light Duty Core
Rotators will handle cores from .100 to 2 inches O.D. The Medium Duty
Core Rotators will rigidly hold and rotate cores from 5/8 inch to 4 inches diameter.
The core is held between three rubber drive rollers and all three rollers are
driven for more positive core rotation.
- A Belt Winding Head of new design is available for winding heavy wire
through small residual holes.
- All components are of bolt-on or plug-in construction
assuring years of continuous use and trouble free service.
- Shipping weight is 132 pounds.
A FRESH LOOK AT THE RELATIVE LOW COST OF ACQUIRING
PRODUCTION MACHINERY
When looking at the cost of better production equipment, the hourly cost of such
equipment is about one tenth the cost of the operator on an hourly basis.
Take a machine in the price range of $10,000.00, for a round figure that is easy
to divide, and purchased as a business equipment loan for five years at about
eight percent.
There are 2,000 working hours in a year at 40 hours per week. The cost of the
loan would be $14,000.00, over a period of five years, divided by 10,000 hours
in five years, or about $1.40 per machine working hour.
Each machine working hour is less than one tenth the operator cost at $20.00
per hour.
Your production could possibly be increased fifty percent over what it was.
Improvement can only be achieved with better equipment and techniques.
Send for Brochure
for further information and prices.
|