When the audio movie is over you have two choices:
Click on the small triangle at the lower left to replay the audio movie or scroll down to read the features and specifications of the machine.

Click for Next Video

Return to the index of machines at the "Home Page" to select and view a different machine.

FEATURES


  • The Productor M Toroid Winder is a recent addition to the Productor series of toroidal winders, which have been a standard in the industry for many years.
  • Programming and Recalling of Pre-Recorded Productor M Toroid Winding Programs.

The New Gorman Productor M has the ability to record and recall previously recorded programs. The Taily Controller can store over one hundred winding programs.

There are a total of 999 levels (or steps) available in the Taily memory.

The start level of a winding program is used for loading the proper amount of wire on the shuttle. The next level will start the wind and will show the number of turns, the shuttle direction, the core rotation direction and the stop count of the winding.

Programs are called up from memory by the start and finished numbered levels in each program.

A log book would be kept of all programs giving customer identification and a description of the Toroid. The program should be in consecutive order containing vital information such as wire and shuttle size, winding head size, toroidal core rotator diameter and core dimensions along with other pertinent information which can not be programmed into the controller.

All programs stored in one controller can be transferred to a new controller with a few simple commands. Programs can be deleted and the space left is available for new programs.

 


SPECIFICATIONS


  • Four Inch Precision Winding Heads - Will accommodates wires from 20 AWG to 44 AWG.
  • Six Inch Precision Winding Heads - Will accommodate wires from 16 AWG to 44 AWG.
  • Wide Core Size Range- Using the four winding heads available: core sizes from .055" I.D. to 4" O.D. can be wound.
  • Variable Speed- Ball bearing four drive rollers rotate the shuttle at speeds up to 2000 turns per minute using the 4 inch head.
  • Jockey Stick Core Positioning- The entire holder assembly may be moved back, forward or sideways while the core is being wound- A Gorman Exclusive.
  • Power Core Jog is standard equipment. CW/CCW for quickly indexing the core to a new position.
  • Machines are available in 115V or 220V versions at no additional cost. All internal electrical components are of bolt-on or plug-in construction assuring years of continuous use and trouble free service.

          Send for Brochure for further information and prices.